+8613631697416
10KV 10TΩ High power high voltage insulation tester megger
- It adopts microcomputer control, menu operation, large-screen LCD dot matrix display, stable performance, and is an intelligent instrument.
- Strong anti-interference ability, suitable for measurement in strong electromagnetic interference environment.
- There are 8 voltage output ranges of 50V, 100V, 250V, 500V, 1.0kV, 2.5kV, 5.0kV and 10.0kV.
- The output high voltage can also be continuously adjusted from 0V to full range.
- Automatic measurement of R15, R60, R600, automatic calculation of absorption ratio, polarization index,
- Strong load capacity, short circuit current is about 5mA.
- Measuring range 0 ~ 10TΩ, automatically switch the range.
- The analog bar pointer is combined with the digital display to visually indicate the changing trend of the data and accurate measurement results.
- The test time is displayed at any time, and the buzzer will automatically beep every 15 seconds.
- After the measurement is completed, the high pressure is automatically released, and the high pressure release time does not exceed 30 seconds.
- Automatically measure the ambient temperature, air humidity and the date and time of each test.
- Can save 60 sets of measurement results, and the data can not be lost for 20 years.
- Built-in micro-printer can print the measurement results without meter reading. (Optional)
- Comes with RS232 serial interface, can communicate with computer data.
- In the non-test state, if there is no operation for 5 minutes, the instrument prompts to shut down.
- It has comprehensive and complete protection functions and high working reliability.
描述
10KV High power high voltage insulation tester megger
Introduction
10kV adjustable high-voltage digital megohmmeter has high test voltage and strong output. The measured object often has power frequency leakage or induced high-voltage interference energy. Therefore, for personal safety, the safety ground wire must be connected when using this instrument!
10kV adjustable high-voltage digital megohmmeter test instrument is designed by OUR Factory to solve the electrical insulation resistance characteristics of large high-voltage transformers, motors, electrical appliances, remote power cables or buried cables under strong interference in high-voltage substations and power plants. It can also be used to measure electrical insulation resistance characteristics in a wide range of fields.
Features
- It adopts microcomputer control, menu operation, large-screen LCD dot matrix display, stable performance, and is an intelligent instrument.
- Strong anti-interference ability, suitable for measurement in strong electromagnetic interference environment.
- There are 8 voltage output ranges of 50V, 100V, 250V, 500V, 1.0kV, 2.5kV, 5.0kV and 10.0kV.
- The output high voltage can also be continuously adjusted from 0V to full range.
- Automatic measurement of R15, R60, R600, automatic calculation of absorption ratio, polarization index,
- Strong load capacity, short circuit current is about 5mA.
- Measuring range 0 ~ 10TΩ, automatically switch the range.
- The analog bar pointer is combined with the digital display to visually indicate the changing trend of the data and accurate measurement results.
- The test time is displayed at any time, and the buzzer will automatically beep every 15 seconds.
- After the measurement is completed, the high pressure is automatically released, and the high pressure release time does not exceed 30 seconds.
- Automatically measure the ambient temperature, air humidity and the date and time of each test.
- Can save 60 sets of measurement results, and the data can not be lost for 20 years.
- Built-in micro-printer can print the measurement results without meter reading. (Optional)
- Comes with RS232 serial interface, can communicate with computer data.
- In the non-test state, if there is no operation for 5 minutes, the instrument prompts to shut down.
- It has comprehensive and complete protection functions and high working reliability.
Technical index
Technical indicators of 10kV adjustable high-voltage digital megohmmeter | |
Rated test voltage | 0V ~ 10.0KV |
Measuring range | 0 ~ 10TΩ |
Output voltage error | ±5% |
Short circuit current | About 5mA |
Level of accuracy | 5.0 level |
Basic error of lower half range | ±( 5%·Rx + 1d ) |
Basic error of the upper half of the range | ±( 10%·Rx + 2d ) |
High voltage display error | ±( 5%·Ux + 1d ) |
Temperature measurement error | ±0.5℃ |
Air humidity measurement error | ±2%RH |
Power supply | 14.8V lithium battery |
Battery charge time | 30 days 10 DAR and 5 PI tests per day |
Insulation resistance | > 500 MΩ (between test line and chassis) |
Withstand voltage | AC10.0kV 50Hz 1min |
(Between test line and chassis) | |
Operating temperature and humidity | 0℃ ~ + 40℃ < 85%RH |
Storage temperature and humidity | – 20℃ ~ + 50℃ < 90%RH |
Dimensions | 320×230×270(Mm) |
Weight | ≈ 4.5kg |
评价
目前还没有评价